Garden tiller motor-driven 161 cc, working width 36-65 cm
delivery category 2 to Sweden: 69,95 €
Work width
36-65 cm
3-in-1
Multitool
Work depth
10-30 cm
10-30 cm
Motor
3.6 kW (5 HP)
3.6 kW
The DQ-0310 garden tiller has an extremely powerful and long-lasting 4-stroke engine that you can easily start by pulling the rope. With a mighty capacity of 161 cm³ and an output of 3.6 kW (5 HP), you can effortlessly guide the machine even over large spaces. The air-cooled petrol engine drives the tine unit smoothly so that the blades can do their work - you can dig and loosen the soil with minimal effort and prepare it perfectly for sowing.
With an initial working width of 36 cm, you cover a large area and are at the same time agile in narrower spaces of your garden. The tine extensions included in the package, which you can easily mount on the left and right of the basic tiller, allow you to easily increase the working width to 65 cm, so that you can tackle even larger areas quickly and with less effort. With this maximum flexibility, you are perfectly equipped for all corners and angles of your kitchen garden.
The three-way adjustable drag bar helps you regulate the forward drive and keep the track comfortably. You can also use it to change the working depth of the garden tiller. Depending on your choice, you can plough and roll, lightly loosen the soil or apply fertiliser – all with only one tool - where you would otherwise have to juggle spades, garden claws and the likes. Simply pull the cotter, place the bolt, secure again and off you go!
To make effective soil cultivation possible in the first place, we have paid special attention to the finishing of the tiller. The specially shaped tines and their arrangement on the rotary unit allow the soil to be broken up and loosened to the healthiest of extents. The divisibility of the cutting unit (from 65 cm to 36 cm working width) and the additionally included plant protection discs provide you with the best equipment for all areas of your kitchen garden!
When working between existing plant rows, it is enormously important that the plants outside the working area are not damaged by the hoeing blades and covered by flying particles, stones and soil. Both your plants and border areas such as bed borders or garden fences are optimally protected by the practical plant guards, which can be attached to the outside of the tine unit on the left and right. This additional safety feature is available with both working widths (36 and 65 centimeters) and makes soil cultivation an all-around comfortable affair.
Work safety has always been a top priority for all DENQBAR garden tools. In order to ensure continuous safe working with the motor tiller, in addition to the extension of the tilling set, additional extensions for the mudguard are also included. Whirling up stones, plant debris and soil during digging is thus perfectly contained and a continuous flow of work without restrictions is made possible. The mudguards can be easily attached and detached from the respective holes, depending on the working width. With the DENQBAR cultivator you are always on the safe side!
The handlebar, which is additionally reinforced by a tie rod, offers increased stability and enables pleasantly light and low-vibration tool guidance even on loose and bumpy ground. Just a slight lifting of the handlebar is all it takes to reduce the working depth and at the same time increase the drive of the DENQBAR motor tiller. The transport wheel, which can be extended by means of a tension spring, ensures that your tool stands securely during work breaks and so the cultivator can be moved conveniently towards the garden shed when the work is done. Carefree steering, turning and transporting with the 3 in 1 multifunctional tool for your kitchen garden!
The DENQBAR motor tiller with its enormously powerful 4-stroke petrol engine, a massive 3.6 kW (5 HP) and 161 cm³ displacement offers you the optimum solution for loose soil in your kitchen garden. As soon as the last frost has passed, you can dig the soil with our variable garden tiller, weed and root at the same time and work in fertiliser. With the brand new 3 in 1 solution from DENQBAR, you are ideally prepared for planting vegetables and flowers in spring. Thanks to the improved oxygen supply and the increased permeability of water, heat and nutrients, your soil provides the perfect basis for healthy plant growth - resulting in a bountiful vegetable harvest and full bloom!
Thanks to the optimally balanced weight and the extra strengthened handlebar, our cultivator is a robust and at the same time manoeuvrable and easy to steer helper, which enables you to work in narrowly positioned crops as well as on larger areas. Additional flexibility is provided by the two possible working widths (36 cm and 65 cm) - ideal for tasks between several beds and, thanks to the extension attachment, effective for larger spaces. Both the extension of the tine unit (from 16 to 24 cutting blades) and the tine shields can be fitted and removed in no time at all using cotter pins, so that you can flexibly change the width at any time. The plant guards, which are also included, allow you to work between already existing plant rows without any difficulty. This prevents damage during the tilling process. The working depth of the tiller can be easily adjusted in 3 steps by using the drag bar - this allows flat cultivation in about 10 to 15 cm as well as coarse turning of the soil in 30 cm (standard dimension of a spade blade).
Put the spade in the back corner of your tool shed then, mothball the weeder and leave the pick-axe to your neighbour. The DENQBAR DQ-0310 garden tiller makes the tiring work with hand tools a thing of the past, is easy on your back and saves you valuable time!